0

PicoLog 1000 Series DATA LOGGER

PicoLog 1000 Series DATA LOGGER
Product Description
Multichannel data acquisition (DAQ)
  • Up to 16 input channels per data logger
  • Up to 4 output channels per data logger
  • Use up to 20 data loggers at the same time
  • Up to 1 MS/s sample rate
  • USB connected and powered
  • Data acquisition software and SDK included

A distinguished pedigree

The Pico Log 1000 Series is the result of a distinguished lineage that goes back to the release of our first multichannel data logger  the ADC-11 ”in 1993. The original ADC-11, and its successor the USB ADC-11, proved to be the perfect choice for users wanting a low-cost way to measure and record multiple signals. The Pic oLog 1000 Series builds on this success to give you the same low-cost data acquisition but with greater power and performance. (Because the ADC-11 was so popular we ve also added a USB ADC-11 compatibility mode which allows you to use your PicoLog 1000 logger as a direct replacement to the USB ADC-11.)

Product Details:

General Operation

0 degree C to 70 degree C

Weight

Less Than 200 g (7.05 oz)

Dimensions

45 x 100 x 140 mm (1.77 x 3.94 x 5.51 in)

Relative Humidity

5% to 80% RH

For Quoted Accuracy

20 degree C to 50 degree C

Specifications:

Inputs

Model

PicoLog 1012

PicoLog 1216

Maximum sampling rate
Continuous streaming

Real-time continuous
Block mode#1

1 kS/s per channel in PicoLog, 100 kS/s shared by all channels using the supplied SDK
1 kS/s or greater
1 MS/s single-channel

Buffer memory

8000 samples, shared by all channels

Analog inputs

12#2

16#2

Analog bandwidth (–3 dB)

DC to 70 kHz

Input type

Single-ended, unipolar

Input voltage range

0 to +2.5 V

Linearity (at 25 °C)

1 LSB

Resolution

10 bits

12 bits

Accuracy

0.01

0.005

Overvoltage protection

±30 V to ground

Input coupling

DC

Input impedance

1 MΩ

Outputs

Digital output (D0…D3)

2

4#2

Digital outputs (PWM)
period
duty cycle

None

1
100 µs to 1800 µs
Adjustable from 0% to 100% in 1% steps

Digital outputs (all)
the logic low voltage
the logic high voltage
current limit

100 mV (typical)
3.3 V
1 kΩ resistors in series with outputs

Power output for sensors

2.5 V @ 10 mA, current-limited

Contact Us

Plot No-70, Road No-19, Cooperative Bank Colony, Nagole, Hyderabad, Telangana, 500068, India
Phone :+918068211760